3D printed 7up bicycle part

The project was offered from Dr. John Gershenson, part of his lab for measurements.

Bill of Materials

Only plastics and 3D-printer needed.

Link to all source files

Link to all STLs

Tools needed

Skills and knowledge needed

  • Basic measurement

Technical Specifications and Assembly Instructions

  1. Print the top part and down part separately.
  2. Joint them by heater through the edge of each part.
  3. Printing time for each part is about 1.5 hours.
  4. Jointing time is about 15 min.

Common Problems and Solutions

  • Carefully when using the heater, don't burn yourself:)

Cost savings

  • Cost estimate: about 2 dollar
  • Commercial equivalent: about 10 dollar because of the material.
  • 8$ savings and 80% savings
This article is issued from Appropedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.