Compost Toilet Hinge

Toilet seats and hinges are an overlooked item in the modern world. A proper seat and hinge provides support for when nature calls. This item may be used in a composting toilet aplication.

  1. Picture of completed print using

Bill of Materials

  1. Plastic for the print
  2. Screw
  3. Nut

The link for the OpenScad files as well as the STL can be found here:

Tools needed

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Screwdriver (sized for the screw)

Skills and knowledge needed

  • No extra skills necessary

Technical Specifications and Assembly Instructions

  1. Print the parts
  2. Scrape plastic off
  3. Screw the bolt through the holes of the hinge
  4. Place nut over bolt

Common Problems and Solutions

  1. Problems printing round parts of hinge
    1. Change print quality

Cost savings

  • If your solution is not a low cost one then it is not really appropriate.
  1. $2 in plastic, $0.10 bolt, $0.05 nut
  2. A commercial equivalent can be found at: Toilet Hinge
  3. $7.90 Savings or 74.7%
This article is issued from Appropedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.